Tecna Air operated portable spot gun 7911_2,5kVA
For car body repair.
For maintenance and preassembly works in industry.
Complete with synchronous electronic built-in timer 2 to 65 cycles and SCR contactor.
Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidized sheets, on surfaces with paint residues or on black sheets.
Current control with phase adjustment to carry out difficult welds, on very thin thickness, on rods with reduced Ø, on stainless steel sheet and similar.
Additional arm coupling to provide larger gap between arms.
A built-in differential pressure switch operates the timer when the electrode force is correct.
All transformers are coated with F class insulation material.
Test are made using 4000 volts.
To be used with arms item 7401/7402/7403/7404/7405/7406/7407.
Pulsation weld time control available (P version).
Tecna Pneumatic gyroscopic spot welder water cooled 7913_6kVA
For heavy duty works in car body repair.
For light production works in industry.
Complete with synchronous electronic built-in timer 2 to 65 cycles and SCR contactor.
Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidized sheets, on surfaces with paint residues or on black sheets.
Current control with phase adjustment to carry out difficult welds, on very thin thickness, on rods with reduced Ø, on stainless steel sheet and similar.
Balanced construction for easy operation.
Additional arm coupling to provide larger opening between arms.
Threaded base for fixing on a bench.
A built-in differential pressure switch operates the timer when the electrode force is correct.
All transformers are coated with F class insulation material. Test are made using 4000 volts.
To be used with arms item 7512/7513/7514/7515, on request.
Pulsation weld time control available (P version).
Tecna Pneumatic spot welder water cooled 7915_6kVA
Same performances as item 7913 without gyroscopic.